Strong, stiff engineering plastic often used to replace metal bearings and bushings
Nylon is a strong, stiff engineering plastic with outstanding bearing and wear properties. Nylon is frequently used to replace metal bearings and bushings often eliminating the need for external lubrication. Other benefits include a reduction in part weight, less operating noise, and decreased wear on mating parts.
Shop for Nylon
12 in x 12 in – 48 in x 120 in
0.031 in – 4 in
Note: Type 6-Cast and Type 6/6-Extruded Sizes Vary
0.187 in – 13 in
2 in – 5 in
||Sheet and Rod:
Natural, Green, Black
||Unfilled, Glass-Filled, Oil-Filled, MOS2
Length, width, thickness, and diameter tolerances vary by size, by manufacturer, brand, and grade. Custom sizes and colors available upon request. Tube is also available in standard outer diameter sizes from 5 in – 40 in, complete our Get a Quote form for more information.
Nylon Properties and Material Options
Nylons are typically described according to numbers (6, 66, 11, 12, etc.) which relate to their molecular structures. Although there are many types of Nylon, the two most common available in sheet, rod, and tube are Nylon 6 and Nylon 6/6.
Nylon 6 and Nylon 6/6– have very similar mechanical, thermal, and electrical properties. Both are available in a variety of colors and formulations that are engineered to meet specific application requirements. For Nylon 6 chemical resistance view our chart.
Nylon 6– is generally manufactured into sheet, rod, and tube via a liquid casting process. Casting is often the most cost effective method for producing large diameter rod, tube, and thick sheet. This process has the added advantage of allowing manufacturers to create custom near net (irregular) shapes. Near net shapes are useful in the construction of parts that would yield poorly from standard sheet, rod, or tube stock.
Nylon 6/6– sheet, rod, and tube are usually produced by melting solid pellets of the polymer and processing them through a thermoplastic extruder. Extrusion is a fast and economical method for making small diameter rod, tube, and thin sheet. Unlike cast Nylon 6 stock shapes, extruded Nylon 6/6 sheet, rod, and tubing can be manufactured to any length, which can be an advantage for cost effectively yielding finished parts.
Nylon Grades– Nylon is available in a variety of specialty formulas. Molybdenum disulphide-filled (MOS2) and oil-filled nylons have enhanced wear properties often eliminating the need for external lubrication. Heat-stabilized nylon withstands higher operating temperatures. Nylon is available in glass-filled grades for enhanced stiffness and strength. FDA compliant grades of nylon are available for direct food contact.
Nylon with Metal Core– Nylon billets can be manufactured into many different components including gears, rollers, sprockets and augers. In power transmission applications, NYMETAL® billets combine the performance advantages of nylon and metal into one cohesive unit.
Tech Tip– Nylon has relatively high moisture absorption compared with many other thermoplastics. Nylon parts that must perform in wet environments should be designed with tolerances that factor in dimensional changes due to moisture absorption.
Typical properties of NYLON
||10,000 - 13,500
||10,000 - 14,000
||9,500 - 11,000
||420,000 - 500,000
||400,000 - 500,000
||375,000 - 475,000
|Izod impact (notched)
||ft-lbs/in of notch
||0.7 - 0.9
||1.4 - 1.8
@ 264 psi
||200 - 400
||200 - 470
||200 - 400
(immersion 24 hours)
||0.60 - 1.20
||0.05 - 1.40
||0.50 - 0.60
Values may vary according to brand name. Please ask your Curbell Plastics representative for more specific information about an individual brand.
Explore the physical, mechanical, thermal, electrical, and optical properties of nylon.
Sort, compare, and find the plastic material suited for your application using our interactive properties table.